Leonardo Signorelli

Developer

Hello there! My name is Leonardo Signorelli and I am a Technical Account Manager at Acquia currently working with two TAM teams: the TAM team Vega and the TAM team Gemini. I joined Acquia in July 2022, and prior to that, I spent four years working as a Drupal Back-end Developer for the University of Colorado at Colorado Springs. During my time there, my role involved creating, developing, upgrading, and maintaining the University's Acquia Cloud Site Factory account. I also executed Drupal core and module updates each week, searched for and installed new modules when needed, and developed new content types, paragraphs, and themes to aid in the management of all the Drupal sites of the University.

Configure a Drupal 10 codebase with Drupal CMS and Site Studio for Site Factory: Part 4

Last updated October 11, 2024
2 minute read

Goal

Demonstrate a regular Site Factory Deployment workflow with Site Studio in mind.

Overview

This is Part 4 of a five-part comprehensive tutorial covering the set up of a new Drupal 10 codebase with Acquia CMS and Site Studio for Acquia Cloud Site Factory (ACSF). In the previous section you learned how to create a new ACSF codebase with a custom profile that you will use to create new Acquia CMS sites and automatically import all the existing Drupal and Site Studio configuration. In this section I will demonstrate a regular ACSF deployment workflow with Site Studio in mind by adding some minor changes to the existing codebase and pushing the new changes across your ACSF sites.

This guide has been divided into five parts:

Set up Cloud IDE, Install Drupal 10, and Prepare your Codebase for Site Factory
Acquia CMS and Site Studio installation and configuration for Site Factory
Create a Custom Profile and test New Site Creation with Site Factory
ACSF Deployment Workflow with Site Studio
Optional: Configure multiple Site Studio sync directories

I will now guide you through a standard Site Factory deployment workflow with Site Studio. This will involve making minor modifications to the existing codebase and pushing the updates to your ACSF sites.

Making changes to your Codebase: Config Ignore configuration

In order to have configuration differences between your ACSF sites, you will need to list inside the Config Ignore module the configuration entities that you wish to be different between your sites.

For example, If you want to have different site names and different webforms between your Site factory sites, you should add the following configurations entities to your Config Ignore module:

system.site:name (Will ignore the name of the system site settings, but will not ignore other system.site configuration.)
webform.webform.* (will ignore all configuration entities that starts with webform.webform)

In your Cloud IDE site, go to the Config Ignore admin page ( /admin/config/development/configuration/ignore) and add the following:

system.site:name
webform.webform.*

Save your changes.

An alternative method that enables adjustments to be made to your Site Factory site settings, without impacting the site's configuration, is through the utilization of the Site Settings and Labels module:

Site Settings and Labels
https://www.drupal.org/project/site_settings

Export the configuration changes

After you make changes to your codebase, it’s a good idea to check for Database updates:

Signorelli IDE:~/project (main) $ drush updb
[success] No pending updates.

Export the new Drupal configuration:

drush cex

Signorelli IDE:~/project (main) $ drush cex
[notice] Differences of the active config to the export directory:
+------------+------------------------+-----------+
| Collection | Config                 | Operation |
+------------+------------------------+-----------+
|            | config_ignore.settings | Update    |
+------------+------------------------+-----------+

The .yml files in your export directory (/home/ide/project/config/default) will be deleted and replaced with the active config. (yes/no) [yes]:
> yes
[success] Configuration successfully exported to /home/ide/project/config/default.

Export the Site Studio configuration:

drush sitestudio:package:export

 Files in your export directory (../config/site_studio_sync/) will be deleted and replaced with the package config and files. (yes/no) [yes]:
> yes
➜                                                
➜   Exported 264 config and 38 non-config files. 
➜                                                
/home/ide/project/config/default

Deploy your codebase changes to ACSF

First, you need to push your new codebase changes to your repository:

git add -A
git commit -m "BLT-002: Config Ignore minimal configuration."
git push

Deploy your codebase to ACSF:

blt artifact:deploy

I named this new deployed code: 1.0.1-tamacsf

Signorelli IDE:~/project (main) $ blt artifact:deploy
Would you like to create a tag? (y/n) y
Enter a valid commit message [BLT-003: Config Ignore minimal configuration.] 
Enter the tag name for the deployment artifact, e.g., 1.0.0-build 1.0.1-tamacsf

Go to the ACSF Console UI of one of your lower environments, for this tutorial, I’m using the test environment.

Navigate to Administration -> Update code:

In the Site Update page, use the dropdown to select your new codebase (1.0.1-tamacsf):

Click the Update button and wait until the update process finishes:

Check for configuration differences: Create your second ACSF site

It’s recommended that you always create a new site to test that your codebase is working fine and that it doesn’t create configuration differences.

Create a new ACSF site using your new codebase. Go to Sites and select your group:

Click the “Create a new Site” button.

Provide a name to your new site (Example: site2), and click the “Create Site” button:

Create a new Drush alias for your new ACSF site

Go back to your Cloud IDE and create a new Drush alias for your new ACSF site using the aliasgenerator.sh bash script.

Execute the aliases.sh bash script and follow the instructions:

./aliasgenerator.sh

Signorelli IDE:~/project (main) $ ./aliases.sh 

             <------->
         <--------------->
<--------------------------------->
|       Create Drush Aliases       |
<--------------------------------->
         <--------------->
             <------->

      |--------------------|
      |     Main Menu      |
      |--------------------|
      | 1 - New site Alias |
      | 2 - Exit           |
      |--------------------|

Select a number from the Main Menu: 1

Selected: New site Alias
------------------------

Make sure to enter the name of the site you created in ACSF.
Example: If the ACSF URL assigned to your new site is site1.acquiatam2.acsitefactory.com
Enter site1

Provide the name of the site you want to create a Drush alias: site1

Is this site name correct?: "site2" (Yes/No/Cancel = y/n/c)
y

Generating the drush alias for this new site..

Ready! Going back to the Main Menu...

      |--------------------|
      |     Main Menu      |
      |--------------------|
      | 1 - New site Alias |
      | 2 - Exit           |
      |--------------------|

Select a number from the Main Menu: 2

Selected: Exit
--------------

Exiting this script…
Signorelli IDE:~/project (main) $

Check that your new site doesn’t have configuration differences:

drush @site2.01test cex

Signorelli IDE:~/project (main) $ drush @site2.01test cex
[notice] The active configuration is identical to the configuration in the export directory (../config/default).
../config/default
Connection to acquiatam201test.ssh.enterprise-g1.acquia-sites.com closed.
Signorelli IDE:~/project (main) $

Testing your new codebase: Change the site name of your second site

drush @site2.01test uli

Navigate to the “Basic site settings” admin page (/admin/config/system/site-information) and change the name of your new site:

Go to the Basic site settings admin page

Save your changes.

Check that this new change in your second site didn’t create a configuration difference:

drush @site2.01test cex

Signorelli IDE:~/project (main) $ drush @site2.01test cex
[notice] The active configuration is identical to the configuration in the export directory (../config/default).
../config/default
Connection to acquiatam201test.ssh.enterprise-g1.acquia-sites.com closed.
Signorelli IDE:~/project (main) $

Making changes to your Codebase: Install a new module and make changes to Site Studio
I will install the Shield module to demonstrate the process of adding a new module to your codebase.

Install the new module with Composer

Go to your Cloud IDE instance and execute the following composer command to install the Shield module:
```
composer require 'drupal/shield:^1.7'
```
Enable the Shield module:
```
drush en shield
```
After installing a new module, it’s alway recommended to see if there are pending database changes:
```
drush updb
```
```
Signorelli IDE:~/project (main) $ drush updb
[success] No pending updates.
Signorelli IDE:~/project (main) $ 
```
Go to the Shield module configuration page to make sure the module was installed and enabled successfully (/admin/config/system/shield):

Image

Add the Shield module to the Config Ignore module

If you wish to have the ability to use different Shield credentials per site, you will need to add the Shield configuration entity to the Config Ignore module.

Open a new Terminal window in your Cloud IDE instance and execute “drush cex” to find out the filename of the Shield configuration file. Respond NO to the prompt as we don’t want to export the configuration changes at this moment:
```
drush cex
```
```
Signorelli IDE:~/project (main) $ drush cex
[notice] Differences of the active config to the export directory:
+------------+-----------------+-----------+
| Collection | Config          | Operation |
+------------+-----------------+-----------+
|            | shield.settings | Create    |
|            | core.extension  | Update    |
+------------+-----------------+-----------+
The .yml files in your export directory (/home/ide/project/config/default) will be deleted and replaced with the active config. (yes/no) [yes]:
> no
In ConfigExportCommands.php line 155:
             
 Cancelled.
Signorelli IDE:~/project (main) $
```
Go to the Config Ignore admin page of your Cloud IDE site and add “shield.settings” to the end of the list (/admin/config/development/configuration/ignore):

Image

Click the “Save configuration” button to save the changes.

Make changes to Site Studio

In order to demonstrate how to deploy Site Studio changes to ACSF and your ACSF sites, I will change the logo icon of the Site Studio’s Master template.

Navigate to /admin/cohesion/templates/master_templates/master_template/edit and double click the “Site Header” component:

Image

Remove the existing Acquia CMS logo image and click the “Select image” button:

Image
1. On the Imce File Manager window, click the “Upload” button to upload a new image from your computer.
2. After the file is uploaded, make sure it’s selected.
3. Click the “Select” button.
Image

Click the “Apply” button to save the changes to the “Site Header” component:

Image

Click the “Save and continue” button to save the changes to the Master Template:

Image

Follow the same steps above to change the Logo Icon of the “Master Template - Boxed” Site Studio template:

Image

Go back to the Cloud IDE terminal and clear the Drupal cache:
```
drush cr
```
Now, if you visit your Cloud IDE site, you should see the new Logo Icon:

Image

Export your new Drupal and Site Studio configuration

Run the following BLT command each time there is a core update or if a new module was installed:
```
blt recipes:acsf:init:drush
```
Export the new Drupal configuration:
```
drush cex
```
```
Signorelli IDE:~/project (main) $ drush cex
[notice] Differences of the active config to the export directory:
+------------+------------------------+-----------+
| Collection | Config                 | Operation |
+------------+------------------------+-----------+
|            | core.extension         | Update    |
|            | config_ignore.settings | Update    |
+------------+------------------------+-----------+
The .yml files in your export directory (/home/ide/project/config/default) will be deleted and replaced with the active config. (yes/no) [yes]:
> yes
[success] Configuration successfully exported to /home/ide/project/config/default.
/home/ide/project/config/default
Signorelli IDE:~/project (main *) $
```
Export the new Site Studio configuration:
```
drush sitestudio:package:export
```
```
 Files in your export directory (../config/site_studio_sync/) will be deleted and replaced with the package config and files. (yes/no) [yes]:
> yes
➜                                                
➜   Exported 264 config and 39 non-config files. 
➜                                                
/home/ide/project/config/default
Signorelli IDE:~/project (main *) $
```
Deploy your new codebase changes to ACSF

First, you need to push your new codebase changes to your repository:
```
git add -A
git commit -m "BLT-003: Shield module and new Site Studio Logo Icon."
git push
```
Deploy your codebase to ACSF:
```
blt artifact:deploy
```
I named this new deployed code: 1.0.2-tamacsf
```
Signorelli IDE:~/project (main) $ blt artifact:deploy
Would you like to create a tag? (y/n) y
Enter a valid commit message [BLT-004: Shield module and new Logo Icon.] 
Enter the tag name for the deployment artifact, e.g., 1.0.0-build 1.0.2-tamacsf
```
Go to the ACSF Management Console of one of your lower environments, for this tutorial, I’m using the test environment. Navigate to Administration -> Update code:

Image

On the Site Update page, use the dropdown to select your new codebase (1.0.2-tamacsf):

Image

Click the Update button and wait until the update process finishes:

Image

Check the changes in your existing ACSF sites

After you pushed your new codebase to the test environment and updated all the existing sites in there, you should always check that the changes were applied successfully to your sites.

Check your sites to see if they are using the new Logo Icon:

Image

Go to the Config Ignore admin page of one of your ACSF sites to check if it has the new “shield.settings” configuration entity in the list.

Enable the Shield module and check for Configuration Differences

Let’s activate and configure the Shield module on one of your ACSF sites. Go to the Shield module admin page ( /admin/config/system/shield) and click the “Save configuration” button without activating the Shield module and making any changes yet. This will generate the default shield.settings configuration for this site:

Image

Now that the shield.settings configuration exists on this site’s database, check the “Enable Shield” checkbox and assign a user and password under the Credentials section. Click the “Save configuration” button to save the changes:

Image

You should see the Shield “Sign In” prompt right after you hit the “Save configuration” button:

Image

Enter your Shield credentials to test everything is working fine.

Check for configuration differences

Now that one of your sites has the Shield module activated, you should check if there are any configuration differences.

Go to your Cloud IDE terminal and execute “drush cex” against your ACSF site that has the Shield module activated:
```
Signorelli IDE:~/project (main) $ drush @site1.01test cex
[notice] The active configuration is identical to the configuration in the export directory (../config/default).
../config/default
Connection to acquiatam201test.ssh.enterprise-g1.acquia-sites.com closed.
Signorelli IDE:~/project (main) $
```
There are no configuration differences, this indicates that we have successfully configured the Config Ignore module to ignore any configuration changes generated by the Shield module on any of your ACSF sites.

Create a new ACSF site to test your new codebase

It’s recommended that you always create a new site to test that your codebase is working fine and that it doesn’t create configuration differences.

Create a new ACSF site using your new codebase. Go to Sites and select your group:

Image

Click the “Create a new Site” button.

Provide a name to your new site (Example: site3), and click the “Create Site” button:

Image

Image

Check your new site for configuration differences

Go back to your Cloud IDE and create a new Drush alias for your new ACSF site using the aliasgenerator.sh bash script.

Execute the aliasgenerator.sh bash script and follow the instructions:
```
./aliasgenerator.sh
```
```
Signorelli IDE:~/project (main) $ ./aliasgenerator.sh 
 
             <------->
         <--------------->
<--------------------------------->
|       Drush Alias Generator     |
<--------------------------------->
         <--------------->
             <------->

      |---------------------|
      |      Main Menu      |
      |---------------------|
      | 1 - New Drush Alias |
      | 2 - Exit            |
      |---------------------|

Select a number from the Main Menu: 1

Selected: New Drush Alias
-------------------------

Make sure to enter the name of a site you already created in your ACSF account.
Example: If the ACSF URL assigned to your new site is site1.acquiatam2.acsitefactory.com
Enter site1

Provide the name of the site you want to create a Drush alias: site3

Is this site name correct?: "site3" (Yes/No/Cancel = y/n/c)
y

Generating the drush alias for site3..

Ready! Going back to the Main Menu...

      |---------------------|
      |      Main Menu      |
      |---------------------|
      | 1 - New Drush Alias |
      | 2 - Exit            |
      |---------------------|

Select a number from the Main Menu: 2

Selected: Exit
--------------

Exiting this script...

Signorelli IDE:~/project (main) $
```
Check your new site for configuration differences:
```
drush @site3.01test cex
```
```
Signorelli IDE:~/project (main) $ drush @site3.01test cex
[notice] The active configuration is identical to the configuration in the export directory (../config/default).
../config/default
Connection to acquiatam201test.ssh.enterprise-g1.acquia-sites.com closed.
Signorelli IDE:~/project (main) $
```
There are no configuration changes in your newly installed ACSF site. That means your codebase was configured correctly.

Congratulations on successfully completing the fourth phase of the five-step guide! You have learned about the standard Site Factory deployment workflow with Site Studio by making minor modifications to the existing codebase and pushing the new updates to your ACSF sites. Furthermore, you have gained valuable knowledge on configuring Drupal to have configuration differences between your ACSF sites through the use of the Config Ignore module.

Now, let us move on to the next phase (optional), where you will expand your understanding by learning how to configure your ACSF codebase to support multiple Site Studio Configuration folders. In addition, you will also discover how to assign your ACSF sites to use the specific Site Studio configuration folder that you desire.

Next phase: Configure multiple Site Studio sync directories

Configure a Drupal 10 codebase with Drupal CMS and Site Studio for Site Factory: Part 4

Goal

Overview

Making changes to your Codebase: Config Ignore configuration

Export the configuration changes

Deploy your codebase changes to ACSF

Check for configuration differences: Create your second ACSF site

Create a new Drush alias for your new ACSF site

Testing your new codebase: Change the site name of your second site

Making changes to your Codebase: Install a new module and make changes to Site Studio

Install the new module with Composer

Add the Shield module to the Config Ignore module

Make changes to Site Studio

Export your new Drupal and Site Studio configuration

Deploy your new codebase changes to ACSF

Check the changes in your existing ACSF sites

Enable the Shield module and check for Configuration Differences

Check for configuration differences

Create a new ACSF site to test your new codebase

Check your new site for configuration differences

Similar Tutorials

Enhancing Acquia Search by Indexing Attachments via Search API Attachments

Removing BLT on Acquia Cloud: How to Get Started

Running Nightwatch tests in Acquia Cloud IDEs

De-index/Block bulk pages from search engines for Drupal sites

Automating Error Detection with Git Bisect Run

How To Poll for Changes in Acquia DAM

Local environment for Acquia Site Factory